To return to ultra violet please
click here
The Sterilight SP740-HO provides point-of-entry disinfection with a flow rate
of 158.9 lpm at a 30 mJ/cm2 dose, 117.3 lpm if a dose of 40 mJ/cm2 is required.
This modular system, based on our NSF validated PlatinumT systems is ideal for
use in a multitude of commercial/industrial application where 1" MNPT
connections are required.
This POE system comes with the feature-laden PlatinumT controller coupled with
the Flow-PaceT UV intensity monitor. This combination allows for 2-stage flow
pacing whereby half-power is provided to the lamps in conditions of no flow and
full-power when the water is running. This allows the system to operate with
minimal power requirements and reduced heat build-up. The PlatinumT controller
provides constant output current and a universal power input
(100-250V./50-60Hz.), as well as visually displaying % UV intensity, remaining
lamp life and total hours of operation.
The system comes with a set of dry contacts allowing for the external hook-up
of a remote device such as a solenoid valve. Using high-output, SterilumeT-HO
coated low pressure germicidal UV lamps coupled with 304 stainless steel, axial
flow reactors, the Platinum systems offer a compact installation footprint, yet
provides a high flow throughput.
Specifications
| Rated Flow Rate - 16 mJ/cm²
|
227.1 L/min (13.6 m³/hr.)
|
| Rated Flow Rate - 30 mJ/cm²
|
158.9 L/min(9.5 m³/hr.)
|
| Rated Flow Rate - 40 mJ/cm²
|
117.3 L/min (7.0 m³/hr.)
|
|
UV Intensity Monitor |
Yes |
|
Flow Pacing
|
Yes
|
|
Elapsed Time Meters - Day Counter |
Yes
|
|
Elapsed Time Meters - Total Running Hours
|
Yes
|
|
Dry Contacts |
Yes |
|
Safety Interlock
|
Yes |
|
Lamp Replacement Reminder |
Yes |
|
Diagnostic Check |
Yes |
| Communication Port |
Yes |
|
Reactor Chamber Material
|
304 SS
|
For full specifications please refer to the spec sheet on the Sterilight UV
SP740-HO/2A
please see the PDF file
here. (1.5MB Download)
Please ring us now on 0800 787 392 or
email us for prices.
|
back
to top